![]() Up to 50 equivalent feet (25' per duct) and 85F maximum intake temperature (no auxiliary fan required).Intake from the left / exhaust from the front.Up to 50 equivalent feet (25' per duct) with 6-inch insulated ducting and insulated rigid corners.Powerful fans on the 1800H-ECX allow the cooling unit to be ducted without the need for an auxiliary fan, as follows: High fan speed: 1864 BTUH / 47F lowest achievable cellar temperature.Low fan speed: 1456 BTUH 55F / 51F lowest achievable cellar temperature.Variable-speed fans with independent control provide maximum flexibility and versatility, as follows: The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar. Dual independent variable-speed fans offer flexibility to trade-off between super-quiet operation vs maximum performance.įor example, assuming 75F ambient temperature, R13 insulation in the non-glass walls and no ducting, the 1800H-ECX would work in the following cellars: Cellar DimsĪll air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. Just 10 1/2-inches deep and 10-inches tall, the 1800H-ECX Houdini cooling unit is designed to "disappear" inside - or atop - the cellar. NOW WITH ENERGY-EFFICIENT EC FANS! CellarPro engineered the 1800H-ECX cooling unit specifically for shallow-depth glass wine cellars. In improperly-constructed cellars, the cooling unit will create excess condensation, leading to damage and premature failure of your cooling unit (not covered by warranty).ĬellarPro 1800H-ECX Cooling Unit (P/N 25544). Our cooling units are designed to be used in properly-constructed wine cellars that are adequately insulated, airtight and sealed with a vapor barrier. When the cooling unit is partially or fully exposed outside the cellar, especially if the cooling unit will be located in a warm, humid environment, we recommend insulating the left 13-inches of the cooling unit with 1-inch closed-cell foam insulation (R-4 or better). Please note: 1800H Houdini cooling units should pull air from and be installed in conditions ranging from 40F to 95F. Optional bottle probe ( highly recommended unless the unit is configured with the networkable thermostat upgrade).Optional overflow drain fitting and 8' flexible drain line.No drain line required for properly constructed, airtight cellars. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |